Home

Articles

Bylaws

Contact Us

Calendar
Links
Members
Membership Application
Newsletters
Officers & Board
Products
PCAV Stake Out Manual
Seminars

 

Reinforced Concrete Pipe

 

Reinforced concrete pipe is available in diameters of 12" to 144. Standard pipe length is 8 feet. Longer lengths are available. Standard and heavy wall thickness are available. Joints can be tongue and groove, confined o ring, single offset with profile gasket, steel end ring and double o ring gasket joints with air test ports. Joints meet ASHTO M198, ASTM 0443 and 0361, and US Bureau of Reclamation. A large assortment of fittings are available including manhole and lateral tees, elbows, wyes, reducers, skewed ends, adapters, wall sleeves, caps/plugs, etc. A variety of linings and coatings are available if required by project conditions. Standard ASTM C76 (AASHTO M170), C361 and C655, AW WA C300 and 0302, and US Bureau of Reclamation reinforced concrete pipe designs. Designs are available for internal hydrostatic pressures up to 65 psi. Special designs are available for deep fills, jacking pipe, pipe on piles, etc.
 

 

TYPICAL APPLICATIONS INCLUDE:

  • Open trench, embankment or trenchless installation

  • Trunk sewers and storm and sanitary sewer outfalls

  • Treatment plant piping, utility tunnels and tunnel liner

  • Storm drains, culverts and sanitary sewers

  • All fill ranges and live load conditions

  • Underwater stormwater runoff retention

  • Impoundment overflow conduits

  • Irrigation distribution systems

Copywrite 2008©Precast Concrete Association of Virginia
All Rights Reserved - PCAVv2DWCS3
Precast Concrete Association of Virginia
1108 East Main Street, Suite 1200
Richmond, VA 23219-3545
pcav@gopcav.com